EVAPORATOR, 4X5X415MM
Price :
US$99.23
SKU
P-RE-003-405-Y
Features
This part is not stocked. Required lead time for orders is 45 days.
1.Configuration: 4 rows × 5 tubes × 415 mm length.
2.Tube Specification: 3/8"×0.35 mm internally grooved copper tube with hydrophilic aluminum fins.
Center-to-center distance between adjacent tubes: 1 inch (25.4 mm).
3.Fin Specifications: 8.5 mm fin pitch, thickness 0.13–0.2 mm.
4.Copper tubes, fins, and side plates must be in tight contact.
5.Welding & Cleanliness: Gas shielded welding required. No oxide layer inside the tubes.
6.Surface corrosion resistance: Must pass 200-hour salt spray test.
Gas tightness test: 28 bar for 1 minute, no leakage.
Pressure test: 42 bar for 1 minute, no deformation.
7.Internal Copper Tube Cleanliness:
Dust content: ?200 mg/m3
Water content: ?100 mg/m3
| Parts Type | Compressor Unit & Assemble |
|---|---|
| Weight (kg) | 1.6000 |
| Parts Length | 0.415 |
| Parts Width | 0.155 |
| Parts Height (m) | 0.088 |
Features
This part is not stocked. Required lead time for orders is 45 days.
1.Configuration: 4 rows × 5 tubes × 415 mm length.
2.Tube Specification: 3/8"×0.35 mm internally grooved copper tube with hydrophilic aluminum fins.
Center-to-center distance between adjacent tubes: 1 inch (25.4 mm).
3.Fin Specifications: 8.5 mm fin pitch, thickness 0.13–0.2 mm.
4.Copper tubes, fins, and side plates must be in tight contact.
5.Welding & Cleanliness: Gas shielded welding required. No oxide layer inside the tubes.
6.Surface corrosion resistance: Must pass 200-hour salt spray test.
Gas tightness test: 28 bar for 1 minute, no leakage.
Pressure test: 42 bar for 1 minute, no deformation.
7.Internal Copper Tube Cleanliness:
Dust content: ?200 mg/m3
Water content: ?100 mg/m3
***THIS PARTS HAS BEEN USED FOR BELOW MODEL NO:***
UR-1D-S1
Features
This part is not stocked. Required lead time for orders is 45 days.
1.Configuration: 4 rows × 5 tubes × 415 mm length.
2.Tube Specification: 3/8"×0.35 mm internally grooved copper tube with hydrophilic aluminum fins.
Center-to-center distance between adjacent tubes: 1 inch (25.4 mm).
3.Fin Specifications: 8.5 mm fin pitch, thickness 0.13–0.2 mm.
4.Copper tubes, fins, and side plates must be in tight contact.
5.Welding & Cleanliness: Gas shielded welding required. No oxide layer inside the tubes.
6.Surface corrosion resistance: Must pass 200-hour salt spray test.
Gas tightness test: 28 bar for 1 minute, no leakage.
Pressure test: 42 bar for 1 minute, no deformation.
7.Internal Copper Tube Cleanliness:
Dust content: ?200 mg/m3
Water content: ?100 mg/m3
Write Your Own Review