EVAPORATOR, 4X5X600MM
Price :
US$137.69
SKU
P-RE-003-405-S
Features
Technical Requirements:
1.Configuration: 4 rows × 5 tubes × 600 mm length.
2.Tube Specification: φ3/8" × 0.35 mm internally grooved copper tube with hydrophilic aluminum fins. Center-to-center distance between adjacent tubes: 1 inch (25.4 mm).
3.Fin Pitch: 6.3 mm.
4.Contact Requirement: Copper tubes, fins, and side plates must be in tight contact.
5.Welding & Cleanliness: Gas shielded welding required. No oxide layer inside the tubes.
6.Performance Tests:
Surface corrosion resistance: Must pass 200-hour salt spray test.
Gas tightness test: 28 bar for 1 minute, no leakage.
Pressure test: 42 bar for 1 minute, no deformation.
7.Internal Copper Tube Cleanliness:
Dust content: ? 200 mg/m3.
Water content: ? 100 mg/m3.
| Parts Type | Compressor Unit & Assemble |
|---|---|
| Weight (kg) | 2.5100 |
| Parts Length | 0.6 |
| Parts Width | 0.129 |
| Parts Height (m) | 0.088 |
Features
Technical Requirements:
1.Configuration: 4 rows × 5 tubes × 600 mm length.
2.Tube Specification: φ3/8" × 0.35 mm internally grooved copper tube with hydrophilic aluminum fins. Center-to-center distance between adjacent tubes: 1 inch (25.4 mm).
3.Fin Pitch: 6.3 mm.
4.Contact Requirement: Copper tubes, fins, and side plates must be in tight contact.
5.Welding & Cleanliness: Gas shielded welding required. No oxide layer inside the tubes.
6.Performance Tests:
Surface corrosion resistance: Must pass 200-hour salt spray test.
Gas tightness test: 28 bar for 1 minute, no leakage.
Pressure test: 42 bar for 1 minute, no deformation.
7.Internal Copper Tube Cleanliness:
Dust content: ? 200 mg/m3.
Water content: ? 100 mg/m3.
***THIS PARTS HAS BEEN USED FOR BELOW MODEL NO:***
SC-0975-0-D1;UR-2D-S1
Features
Technical Requirements:
1.Configuration: 4 rows × 5 tubes × 600 mm length.
2.Tube Specification: φ3/8" × 0.35 mm internally grooved copper tube with hydrophilic aluminum fins. Center-to-center distance between adjacent tubes: 1 inch (25.4 mm).
3.Fin Pitch: 6.3 mm.
4.Contact Requirement: Copper tubes, fins, and side plates must be in tight contact.
5.Welding & Cleanliness: Gas shielded welding required. No oxide layer inside the tubes.
6.Performance Tests:
Surface corrosion resistance: Must pass 200-hour salt spray test.
Gas tightness test: 28 bar for 1 minute, no leakage.
Pressure test: 42 bar for 1 minute, no deformation.
7.Internal Copper Tube Cleanliness:
Dust content: ? 200 mg/m3.
Water content: ? 100 mg/m3.
Write Your Own Review